Aero Radio Control
Hughes MD500e Scale 450 Heli Project
Take a T-Rex 450 Clone and build it into this scale fuselage. Buy the fuselage here.
|Full Length of Fuselage||685mm|
|Full Width of Fuselage||265mm|
|Main Rotor Dia||728mm|
|Tail Rotor Dia||156mm|
|Full Equipped Weight||995g|
|ESC||Turnigy Plush 25A|
|Brushless Motor||KD KA450H|
|Tail Servo||HD Power 2216MG|
|source Replacement Fuselage|
The rear mount is impossible to access so I zip tied it down.
The front mount was bolted down.
The tail secured with some EPP Foam.
Maiden Flight - tail fin not fitted as yet. 980grams AUW.
No vibration so far, who's a happy camper?
Tail fitted, how will it fly now?
Cool looking CF tail blades caused a bad tail fin vibration, so have gone back to the original nylon blades. All is finished.
One sweet chopper!
page updated 12-May-2010
back to BLIS ARC